Gear Pumps of the Extreme Series
High resilience for dialysis, water treatment or laboratory technology


The Extreme Series is designed for high stress loads: It can process difficult fluids such as pigmented inks or strawberry syrup without skipping a beat. With a flow rate of between 1,500 and 5,000 milliliters per minute and the highest pressure among our range of gear pump products, we recommend its use in a variety of applications such as in dialysis machines, or even in applications in the food or printing industry.
Despite being subjected to heavy demands, the Extreme Series features a long service life.
It is equipped with additional bearings and the load capacity of the conventional magnetic coupling can be maxed out to the limit. With its forged pump body, it provides a wide selection of connection options.
As an additional option, it can be equipped with hardened gears for tasks that are especially demanding. The Extreme Series pumps are available with either BLDC or with DC motors.
Application examples
- Inkjet printing systems for ceramic printing
- Inkjet printing systems for glass printing
- In-vitro analysis
- In-vitro diagnostics (IVD)
- Dialysis
- Water purification
Pump specifications of the Extreme Series

The Extreme Series gear pumps are tailor-made to meet your requirements. Look here to view the parameters that allow adjustments to be made:
Flow Range (ml/min) | 100 to 5000 |
Maximum continuous Pressure (Bar) | 5 |
Maximum Intermittent Pressure (Bar) | 6 |
Self-Priming | Yes |
Fluid Viscosity Range (cps) (Standard – consult factory for options) | 0.3 to 1000 |
Motor Types | BLDC or Brush DC |
Fluid Temperature (°C) | -20 to +100 |
Standard Materials (consult factory for options) | 316LSS, PEEK, EPDM |
Download Datasheets & 3D STEP files

Do you still need more accurate information on our Extreme Series? Here is where you can download the data sheets and 3D STEP files for all of our models.
Datasheets Extreme Series (Format EU/APAC)
Datasheets Extreme Series (Format US)
3D STEP files Extreme Series
Flow Range (ml/min) | 100 to 5000 |
Maximum continuous Pressure (Bar) | 5 |
Maximum Intermittent Pressure (Bar) | 6 |
Self-Priming | Yes |
Fluid Viscosity Range (cps) (Standard – consult factory for options) | 0.3 to 1000 |
Motor Types | BLDC or Brush DC |
Fluid Temperature (°C) | -20 to +100 |
Standard Materials (consult factory for options) | 316LSS, PEEK, EPDM |
Datasheets Extreme Series (Format EU/APAC)
Datasheets Extreme Series (Format US)
3D STEP files Extreme Series
Your request

Are you interested in our Extreme Series? Just complete the contact form and we will get back to you with a customized quote as soon as possible. Alternatively you can fill out and send an interactive PDF document, which you can download here.